Environment : Things You Need To Follow When Using Halogen Light Bulbs
|
|
|
By: Jo Alelsto
Date Submitted: 2009-07-23 21:45:32 - Article Views: 92 - Word Count: 1032
|
|
Halogen light bulbs are widely seen around because of their versatility and efficacy compared to their incandescent ancestors. Halogen lamps are different from incandescent lamps in a few aspects like in how they operate, the materials they are made of, the brightness, and even in aspects as trivial as the shape. Let us start at the surface. The glass surface of a halogen lamp is not at all made of the typical, ordinary glass, but is made of quartz, which resists higher temperatures and can therefore be situated closer to the filament. This feature allows halogen bulbs to be smaller than the bulb hanging in your toilet. They are brighter and thus hotter than your ordinary light bulbs. These electric lamps last longer than typical incandescent bulbs because the tungsten in the filament undergoes recycling process and this prevents rapid loss of the tungsten element. This feature also retards blackening of the quartz surface. These halide containing lamps come in variety of shapes which allow them to be used in a wide array of purposes from general lighting to decorative accent purposes. Nevertheless, owners come in terms of replacing their lamps and although changing these bulbs is not specifically difficult, necessary precautions must be observed in handling these objects. Observe the following measures when handling and replacing halogen bulbs.
1) First and foremost, make sure the device is turned off or unplugged. For general safety, never touch the bulb with your naked skin because the oil on your skin is a hazardous impurity on the surface of the bulb. When the bulb gets hot, the oil attacks the surface and creates a weak spot. This leads to shortening of the life span of the light bulb. In severe cases, the weak spot may lead to bulb failure and explosion. Thus, you must wear gloves while holding the bulb. Ensure the quartz surface does not get in contact with the skin. Clean cloth or paper towel may be used.
2) Suppose the lamp has just been used and switched off, wait for a while before attempting to remove the bulb. It is advised to wait for at least fifteen minutes to allow it to cool down to room temperature. This will prevent serious burn injury. Take note that halogen light bulbs are hotter than ordinary bulbs. Once the bulb reaches its termination stage and burns out completely, then it is time to replace it. However, give ample time for it to cool and again use gloves and try as much as possible to not touch the quartz surface.
3) Remove the old busted bulb by unscrewing it from the socket just as you would remove any other light bulbs. If the old bulb is totally busted, you may hold it with your bare hands as long as you have allowed it to cool. Screw the new bulb in place with your gloved hands. Again, do not touch the bulb surface with your bare hands at any time. Turn on the power and see if the bulb lights appropriately.
The use of halogen lamps must be accompanied with safety precautions. These lamps are no typical lamps at home. They are much hotter than typical light bulbs and may cause serious burns through direct contact. Flammable materials should be kept away from direct contact with the lamp surface while turned on. Moreover, these burning lamps emit huge amounts of energy and some ultraviolet radiation. Thus, it is believed certain duration of exposure to these lights may cause symptoms like that of sunburn. Nonetheless, lots of halogen lamps have UV filtered quartz bulb surface.
Note that if at any case, you came to touch the surface of the halogen bulb, wipe the surface thoroughly with alcohol and allow it to dry completely before turning it on. |
Author Resource Required for Reprint:
Jo is a content writer for 'Litelec' (http://www.litelec.co.uk), a UK firm that specializes in the supply of electric light bulbs, light fittings, electrical accessories and related products for home and commercial usage which they market at very reasonable prices. If you want to cut down your electricity fees and also play an important role to the safety of the environment then begin by utilizing halogen light bulbs at home and if you have other cheap light bulbs requirement then have a look at Litelec.
|
Article Source: ArticleMind.com 
|
Tags:
light bulbs  energy saving halogen bulbs energy saving light halogen light bulbs cheap light bulbs |
|
|
Bookmark and Share
|
|
 Environment Category Rss Feed |
|
|
-
No matter how big or small a hurricane is, there will always be a flood of some kind.
Viewed: 10 Times.
Read More ...
-
Electrical storms are dangerous, but many people do not realize just how dangerous they can be to your home and to you.
Viewed: 10 Times.
Read More ...
-
Is aligning your outer life with your inner eco-values so hard? Actually, it turns out that it is.
Viewed: 10 Times.
Read More ...
-
At the East entrance to Glacier National Park, there is a very small restaurant creating a very big impact on the world around them. The Park Cafe, in St. Mary, Montana, appears to be just a small restaurant from the outside. And, as you walk in the front doors, your suspicions will be confirmed. It is a small restaurant.
Viewed: 10 Times.
Read More ...
-
Although there is a big boom in the rise of computers everywhere and the constant upgrade of computers are manifesting, there is another environmental problem that is also slowly building up.
Viewed: 10 Times.
Read More ...
|
|
| Jo Alelsto's Author Feed |
|
|
-
Toll manufacturing has long been regarded as a good alternative to high operating expenditures and capital-invasive industries. The surfacing of this kind of manufacturing is regarded as an enlightenment during the recession era. However, it is vital that businesses learn the ways to spot feasible partners to prevent added losses.
Viewed: 10 Times.
Read More ...
-
Similar to outsourcing, toll manufacturing can be a relatively delicate topic for some especially if the quality of the product is in jeopardy. But, the outcome of this case lies on the way the principal company should handle such agreement. The principle of outsourcing a number of your company processes can actually do more good. Just remember that you are still on top of things and just the same with a credit card, it is by no means an extension of your company.
Viewed: 10 Times.
Read More ...
-
A breathing apparatus aids a firefighter to carry out his task of responding to the call of duty. However, while putting out the blaze is the primary goal, the tolerance of carrying weight and decreased flexibility throughout the operation is one more thing. Firefighters would likewise need to keep in mind that these gas tanks carry limited supply of air which might be exhausted usually within half the projected length of time.
Viewed: 10 Times.
Read More ...
-
Document management is an important requirement of company operations mainly because part of the ergonomic work environment design calls for good filing system, as this promotes efficiency in time, effort, and operational cost. Record management could be consistently carried out by workers themselves whilst managers can certainly employ assistants to handle and be in charge of their pertinent files.
Viewed: 10 Times.
Read More ...
-
A breathing apparatus is an equipment fire fighters make use of when answering to a fire establishment which lets them breathe in such a hostile setting. Carrying and wearing fire safety equipment is a demanding thing, which only a skilled fire fighter can stand. It is very important that all of the fire fighters retain fitness and have the suitable amount of skills and training so as to be able to take action in emergency situations properly.
Viewed: 11 Times.
Read More ...
|
|
Article use is considered your agreement of our Terms of Service.
This work is licensed under a
Creative Commons Attribution-No Derivative Works 3.0 United States License.
Thanks for visiting ArticleMind.com
Copyright © 2009 - 2010 ArticleMind.com
|
|
|
|
|
| |
| |
|
|
Print
